Show simple item record

dc.contributor.authorGuo, Dongzhi
dc.contributor.authorGao, Jinsheng
dc.contributor.authorMcGaughey, Alan J. H.
dc.contributor.authorFedder, Gary K.
dc.contributor.authorMoran, Matthew
dc.contributor.authorYao, Shi
dc.date.accessioned2017-05-09T01:00:06Z
dc.date.available2017-05-09T01:00:06Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_11_111003.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152254
dc.description.abstractA new Stirling microrefrigeration system composed of arrays of silicon MEMS cooling elements has been designed and evaluated. The cooling elements are to be fabricated in a stacked array on a silicon wafer. A regenerator is placed between the compression (hot side) and expansion (cold side) diaphragms, which are driven electrostatically. Air at a pressure of 2 bar is the working fluid and is sealed in the system. Under operating conditions, the hot and cold diaphragms oscillate sinusoidally and out of phase such that heat is extracted to the expansion space and released from the compression space. Parametric study of the design shows the effects of phase lag between the hot space and cold space, swept volume ratio between the hot space and cold space, and dead volume ratio on the cooling power. Losses due to regenerator nonidealities are estimated and the effects of the operating frequency and the regenerator porosity on the cooler performance are explored. The optimal porosity for the best system coefficient of performance (COP) is identified.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign and Evaluation of a MEMS Based Stirling Microcooler
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024596
dc.journal.fristpage111003
dc.journal.lastpage111003
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record