Show simple item record

dc.contributor.authorPearson, Matthew R.
dc.contributor.authorSeyed
dc.date.accessioned2017-05-09T01:00:04Z
dc.date.available2017-05-09T01:00:04Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_10_101701.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152242
dc.description.abstractMicrochannels have wellknown applications in cooling because of their ability to handle large quantities of heat from small areas. Electrohydrodynamic (EHD) conduction pumping at the microscale has previously been demonstrated to effectively pump dielectric liquids through adiabatic microchannels by using electrodes that are flushed against the walls of the channel. In this study, an EHD micropump is used to pump liquid within a twophase loop that contains a microchannel evaporator. Additional EHD electrodes are embedded within the evaporator, which can be energized separately from the adiabatic pump. The effect of these embedded electrodes on the heat transport process, flow rate, and pressure in the microevaporator and on the twophase loop system is characterized. Local enhancements are found to be up to 30% at low heat fluxes. The reverse effect that phasechange has on the EHD conduction pumping phenomenon is also quantified.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElectrohydrodynamic Conduction Driven Single and Two Phase Flow in Microchannels With Heat Transfer
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007617
dc.journal.fristpage101701
dc.journal.lastpage101701
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record