Show simple item record

dc.contributor.authorEnright, Ryan
dc.contributor.authorMiljkovic, Nenad
dc.contributor.authorDou, Nicholas
dc.contributor.authorNam, Youngsuk
dc.contributor.authorWang, Evelyn N.
dc.date.accessioned2017-05-09T01:00:01Z
dc.date.available2017-05-09T01:00:01Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_09_091304.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152216
dc.description.abstractCondensation is an important process in both emerging and traditional power generation and water desalination technologies. Superhydrophobic nanostructures promise enhanced condensation heat transfer by reducing the characteristic size of departing droplets via coalescenceinduced shedding. In this work, we investigated a scalable synthesis technique to produce functionalized oxide nanostructures on copper surfaces capable of sustaining superhydrophobic condensation and characterized the growth and departure behavior of the condensed droplets. Nanostructured copper oxide (CuO) films were formed via chemical oxidation in an alkaline solution resulting in dense arrays of sharp CuO nanostructures with characteristic heights and widths of ≈1 خ¼m and ≈300 nm, respectively. To make the CuO surfaces superhydrophobic, they were functionalized by direct deposition of a fluorinated silane molecular film or by sputtering a thin gold film before depositing a fluorinated thiol molecular film. Condensation on these surfaces was characterized using optical microscopy and environmental scanning electron microscopy to quantify the distribution of nucleation sites and elucidate the growth behavior of individual droplets with characteristic radii of ≈1–10 خ¼m at supersaturations ≤1.5. Comparison of the measured individual droplet growth behavior to our developed heat transfer model for condensation on superhydrophobic surfaces showed good agreement. Prediction of the overall heat transfer enhancement in comparison to a typical dropwise condensing surface having an identical nucleation density suggests a restricted regime of enhancement limited to droplet shedding radii <~2.5 خ¼m due to the large apparent contact angles of condensed droplets on the fabricated CuO surfaces. The findings demonstrate that superhydrophobic condensation typified by coalescenceinduced droplet shedding may not necessarily enhance heat transfer and highlights the need for further quantification of the effects of surface structure on nucleation density and careful surface design to minimize parasitic thermal resistances.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCondensation on Superhydrophobic Copper Oxide Nanostructures
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4024424
dc.journal.fristpage91304
dc.journal.lastpage91304
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record