Show simple item record

dc.contributor.authorDannelley, Daniel
dc.contributor.authorBaker, John
dc.date.accessioned2017-05-09T00:59:57Z
dc.date.available2017-05-09T00:59:57Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_08_081902.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152191
dc.description.abstractThe results of a computational study into the thermal performance of thermally radiating fractallike fins are presented. Previous experimental studies have shown that fractal patterns increase the heat transfer surface area while simultaneously reducing mass. Two fractal patterns were used for comparison, the modified Koch snowflake and the Sierpinski carpet. For an isothermal base fin radiating to free space, the fin effectiveness and fin efficiency are presented for the zeroth and first four fractal iterations in order to quantify the performance. Emissivity, width/thickness ratio, base temperature, and fin material were varied to better understand their impact on the performance of fractallike fins. Based upon the observed results, fractallike fins greatly improve the fin effectiveness per unit mass. In certain cases, fin effectiveness per unit mass was found to increase by up to 46%. As the cost of access to space is significant, this reduction in mass could lead to savings for spacecraft thermal management applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRadiant Fin Performance Using Fractal like Geometries
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023883
dc.journal.fristpage81902
dc.journal.lastpage81902
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record