Show simple item record

dc.contributor.authorLiu, Wei
dc.contributor.authorTamai, Hidesada
dc.contributor.authorTakase, Kazuyuki
dc.date.accessioned2017-05-09T00:59:56Z
dc.date.available2017-05-09T00:59:56Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_08_081502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152186
dc.description.abstractFor a steam generator (SG) in a commercialized sodiumcooled fast breeder reactor (FBR), flow instability in the water side is one of the most important items needing research. As the first step of this research, thermalhydraulic experiments using water as the test fluid were performed under high pressure conditions at the Japan Atomic Energy Agency (JAEA) by using a circular tube. Void fraction, pressure drop, and heat transfer coefficient data were obtained under 15, 17, and 18 MPa. This paper discusses the steamwater pressure drop and void fraction. Using the obtained data, we evaluated existing correlations for void fraction and twophase flow multipliers under high pressure. As a result, the drift flux model implemented in the TRACBF1 code was confirmed to suitably predict the void fraction well under the present high pressure conditions. For the twophase flow multiplier, the Chisholm correlation and the homogeneous model were confirmed to be the best under the present highpressure conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePressure Drop and Void Fraction in Steam Water Two Phase Flow at High Pressure
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023678
dc.journal.fristpage81502
dc.journal.lastpage81502
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record