Show simple item record

dc.contributor.authorMuramatsu, Kenshiro
dc.contributor.authorIde, Takuya
dc.contributor.authorNakajima, Hideo
dc.contributor.authorEaton, John K.
dc.date.accessioned2017-05-09T00:59:50Z
dc.date.available2017-05-09T00:59:50Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_7_072601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152160
dc.description.abstractMetal foams are of interest for heat transfer applications because of their high surfacetovolume ratio and high convective heat transfer coefficients. However, conventional opencell foams have high pressure drop and low net thermal conductivity in the direction normal to a heated surface due to the fully random structure. This paper examines heat transfer elements made by stacking thin layers of lotus metal which have many small pores aligned in the flow direction. The reduction in randomness reduces the pressure drop and increases the thermal conduction compared to conventional metal foams. Experimental results are presented for the heat transfer performance of two types of lotus metal fins, one with a deterministic pattern of machined holes and one with a random hole pattern made by a continuous casting technique. The layer spacing, the hole diameter, the porosity, and the flow Reynolds number were all varied. The measurements show that spacing between fin layers and the relative alignment of pores in successive fins can have a substantial effect on the heat transfer performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer and Pressure Drop of Lotus Type Porous Metals
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023564
dc.journal.fristpage72601
dc.journal.lastpage72601
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record