Show simple item record

dc.contributor.authorXing, Yunfei
dc.contributor.authorWeigand, Bernhard
dc.date.accessioned2017-05-09T00:59:49Z
dc.date.available2017-05-09T00:59:49Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_7_072201.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152156
dc.description.abstractA ninebynine jet array impinging on a flat plate at Reynolds numbers from 15,000 to 35,000 has been studied by the transient liquid crystal method. The spacing between the impingement plate and target plate is adjusted to be 1, 2, 3, 4, and 5 jet diameters. The effect of jettoplate spacing has been investigated for three jetinduced crossflow schemes, referred as minimum, medium, and maximum crossflow, correspondingly. The local air jet temperature is measured at several positions on the impingement plate to account for an appropriate reference temperature of the heat transfer coefficient. The jettoplate spacing, H/d = 3, is found to be better than the others for all the crossflow schemes. Jettoplate spacings H/d = 1 and H/d = 2 result in a sudden decrease in the stagnation zone. The large jettoplate spacings H/d = 4 and H/d = 5 could not provide higher heat transfer performance with higher crossflow.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimum Jet to Plate Spacing of Inline Impingement Heat Transfer for Different Crossflow Schemes
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023562
dc.journal.fristpage72201
dc.journal.lastpage72201
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record