Show simple item record

dc.contributor.authorKandlikar, Satish G.
dc.contributor.authorWidger, Theodore
dc.contributor.authorKalani, Ankit
dc.contributor.authorMejia, Valentina
dc.date.accessioned2017-05-09T00:59:46Z
dc.date.available2017-05-09T00:59:46Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_6_061401.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152134
dc.description.abstractFlow boiling in microchannels has been extensively studied in the past decade. Instabilities, low critical heat flux (CHF) values, and low heat transfer coefficients have been identified as the major shortcomings preventing its implementation in practical high heat flux removal systems. A novel open microchannel design with uniform and tapered manifolds (OMM) is presented to provide stable and highly enhanced heat transfer performance. The effects of the gap height and flow rate on the heat transfer performance have been experimentally studied with water. The critical heat fluxes (CHFs) and heat transfer coefficients obtained with the OMM are significantly higher than the values reported by previous researchers for flow boiling with water in microchannels. A record heat flux of 506 W/cm2 with a wall superheat of 26.2 آ°C was obtained for a gap size of 0.127 mm. The CHF was not reached due to heater power limitation in the current design. A maximum effective heat transfer coefficient of 290,000 W/m2 آ°C was obtained at an intermediate heat flux of 319 W/cm2 with a gap of 0.254 mm at 225 mL/min. The flow boiling heat transfer was found to be insensitive to flow rates between 40–333 mL/min and gap sizes between 0.127–1.016 mm, indicating the dominance of nucleate boiling. The OMM geometry is promising to provide exceptional performance that is particularly attractive in meeting the challenges of high heat flux removal in electronics cooling applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnhanced Flow Boiling Over Open Microchannels With Uniform and Tapered Gap Manifolds
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023574
dc.journal.fristpage61401
dc.journal.lastpage61401
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record