Show simple item record

dc.contributor.authorLei, Jiang
dc.contributor.authorLi, Shiou
dc.contributor.authorHan, Je
dc.contributor.authorZhang, Luzeng
dc.contributor.authorMoon, Hee
dc.date.accessioned2017-05-09T00:59:41Z
dc.date.available2017-05-09T00:59:41Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_4_041903.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152099
dc.description.abstractThis paper experimentally investigates the effect of a turning vane in hub region on heat transfer in a multipass rectangular channel with ribroughed wall at high rotation numbers. The experimental data were taken in the second and the third passages (aspect ratio = 2:1) connected by an 180 deg Ubend. The flow was radial inward in the second passage and was radial outward after the 180 deg Ubend in the third passage. The squareedged ribs with P/e = 8, e/Dh = 0.1, and خ±â€‰= 45 deg were applied on the leading and trailing surfaces of the second and the third passages. Results showed that rotation increases heat transfer on the leading surface but decreases it on the trailing surface in the second passage. In the third passage, rotation decreases heat transfer on the leading surface but increases it on the trailing surface. Without a turning vane, rotation reduces heat transfer on the trailing surface and increases it on the leading surface in the hub 180 deg turn region. After adding a halfcircleshaped turning vane, heat transfer coefficients do not change in the second passage beforeturn while they are different in the turn region and afterturn region in the third passage. Regional heat transfer coefficients are correlated with rotation numbers for multipass rectangular ribbed channel with and without a turning vane.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer in Rotating Multipass Rectangular Ribbed Channel With and Without a Turning Vane
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023040
dc.journal.fristpage41903
dc.journal.lastpage41903
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record