Show simple item record

dc.contributor.authorSong, Ke
dc.contributor.authorWang, Liang
dc.date.accessioned2017-05-09T00:59:41Z
dc.date.available2017-05-09T00:59:41Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_4_041902.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152098
dc.description.abstractSecondary flow is the flow in the cross section normal to the main flow. It plays an important role on the enhanced heat transfer and in the applications in other fields. Secondary flow can greatly enhance the convective heat transfer. In order to find the effectiveness of secondary flow for heat transfer enhancement, a nondimensional parameter, Se, based on the absolute vorticity flux is reported to specify the intensity of secondary flow. Its physical meaning is the ratio of inertial force to viscous force induced by secondary flow. As an example, the effectiveness of secondary flow was numerically studied for a flat tube bank fin heat exchanger with vortex generators (VGs) mounted on both surfaces of the fin. The contributions of VGs are investigated for the enhancements of secondary flow intensity, convective heat transfer, and pressure drop. The method is demonstrated using Se to find out the optimum configurations of VGs. The results reveal that close relationships exist not only between the spanaverage nondimensional intensity of secondary flow and the spanaverage Nusselt number but also between the volume average nondimensional intensity of secondary flow and the overall average Nusselt number. For the configuration studied, a ratio of Nusselt number enhancement to the friction factor enhancement increases with increasing the enhancement of secondary flow intensity. As a supplement to traditional criteria on a good performance heat transfer surface, the nondimensional intensity of secondary flow can be used clearly for an optimum value of VG parameter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effectiveness of Secondary Flow Produced by Vortex Generators Mounted on Both Surfaces of the Fin to Enhance Heat Transfer in a Flat Tube Bank Fin Heat Exchanger
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023037
dc.journal.fristpage41902
dc.journal.lastpage41902
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record