Show simple item record

dc.contributor.authorPappas, Christina A.
dc.contributor.authorDe Cecchis, Paul M.
dc.contributor.authorJordan, Donald A.
dc.contributor.authorNorris, Pamela M.
dc.date.accessioned2017-05-09T00:59:40Z
dc.date.available2017-05-09T00:59:40Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_04_044504.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152088
dc.description.abstractThe effect of fill volume on the heat transfer performance of a cylindrical thermosyphon with an aspect ratio (ratio of the length of the evaporator section to the inner diameter) of 2.33 immersed in a cooling air flow is investigated. The fill volume was systematically varied from 0% to 70.3% of the volume of the evaporator section in a copperwater thermosyphon having an inner diameter of 19 mm. The condenser section was immersed in a uniform air flow in the test section of an open return wind tunnel. The heat transfer rate was measured as a function of evaporator temperature and fill volume, and these results were characterized by three distinct regions. From 0% to roughly 16% fill volume (Region I), the low rate of heat transfer, which is insensitive to fill volume, suggests that dry out may be occurring. In Region II (extending to approximately 58% fill volume), the heat transfer rate increases approximately linearly with fill volume, and increasing evaporator temperature results in decreased rate of heat transfer. Finally, in Region III (from roughly 58–70.3%), the rate of heat transfer increases more rapidly, though still linearly, with fill volume, and increasing evaporator temperature results in increased rate of heat transfer. The thermosyphon rate of heat transfer is greatest at 70.3% fill volume for every evaporator temperature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Fill Volume on Heat Transfer From Air Cooled Thermosyphons
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4023039
dc.journal.fristpage44504
dc.journal.lastpage44504
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record