Show simple item record

dc.contributor.authorMaynes, D.
dc.contributor.authorWebb, B. W.
dc.contributor.authorCrockett, J.
dc.contributor.authorSolovjov, V.
dc.date.accessioned2017-05-09T00:59:38Z
dc.date.available2017-05-09T00:59:38Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_2_021701.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152070
dc.description.abstractThis paper presents an analytical investigation of the thermal transport in a parallelplate channel comprised of superhydrophobic walls. An analytical solution is obtained for the thermally developing state, however, it is the condition far downstream from the entrance where the temperature field exhibits repeating periodic streamwise variation that is of primary interest here. The superhydrophobic walls considered in this paper exhibit alternating microribs and cavities positioned perpendicular to the flow direction and the transport scenario analyzed is that of constant wall heat flux through the rib surfaces with negligible thermal transport through the vapor cavity interface. Axial conduction is neglected in the analysis and the problem is one of Graetz flow with apparent slipflow and periodicity of constant heating. Closed form solutions for the local Nusselt number and wall temperature are presented and are in the form of infinite series expansions. Previously, it has been shown that significant reductions in the overall frictional pressure drop can be expected relative to the classical smooth channel laminar flow. The present results reveal that the overall thermal transport is markedly influenced by the relative cavity region (cavity fraction), the relative rib/cavity module width, and the flow Peclet number. The following conclusions can be made regarding thermal transport for a constant heat flux channel exhibiting the superhydrophobic surfaces considered: (1) Increases in the cavity fraction lead to decreases in the average Nusselt number; (2) Increasing the relative rib/cavity module length yields a decrease in the average Nusselt number; and (3) as the Peclet number increases the average Nusselt number increases. For all parameters explored, the limiting upper bound on the fully developed average Nusselt number corresponds to the limiting case scenario of classical laminar flow through a smoothwalled channel with constant heat flux.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Laminar Slip Flow Thermal Transport in Microchannels With Transverse Rib and Cavity Structured Superhydrophobic Walls at Constant Heat Flux
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007429
dc.journal.fristpage21701
dc.journal.lastpage21701
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record