Show simple item record

dc.contributor.authorWeibel, Justin A.
dc.contributor.authorKim, Sungwon S.
dc.contributor.authorFisher, Timothy S.
dc.contributor.authorGarimella, Suresh V.
dc.date.accessioned2017-05-09T00:59:37Z
dc.date.available2017-05-09T00:59:37Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_2_021501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152068
dc.description.abstractThe thermal performance of passive vapor chamber heat spreaders can be improved by enhancing evaporation from the internal wick structure. A wick structure that integrates conventional copper screen mesh and carbon nanotubes (CNTs) is developed and characterized for increased heat transport capability and reduced thermal resistance. The highpermeability mesh provides for a lowresistance liquid flow path while the carbon nanotubes, with their high thermal conductivity and large surface area, help reduce conduction and phasechange resistances. The wicks are fabricated by sintering a copper mesh on a multilayer substrate consisting of copper and molybdenum. CNTs are grown on to this mesh and a submicron layer of copper is evaporated on to the CNTs to improve wettability with water and wicking. Samples grown under varying degrees of positive bias voltage and varying thicknesses of postCNTgrowth copper evaporation are fabricated to investigate the effect of surface morphology variations. The resultant boiling curves indicate that micro/nanointegrated wicks fabricated with higher positive bias voltages during CNT synthesis coupled with thicker copper coatings produce lower wick thermal resistances. Notably, heat fluxes at the heater surface of greater than 500 W/cm2 were supported without a critical heat flux condition being reached.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Characterization of Capillary Fed Carbon Nanotube Vapor Chamber Wicks
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007680
dc.journal.fristpage21501
dc.journal.lastpage21501
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record