Show simple item record

dc.contributor.authorAcharya, Sumanta
dc.contributor.authorHouston Leedom, David
dc.date.accessioned2017-05-09T00:59:36Z
dc.date.available2017-05-09T00:59:36Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_1_011010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152059
dc.description.abstractLarge eddy simulations of film cooling from a discrete hole inclined 35 deg and fed by a plenum chamber are performed at a density ratio of 2 and blowing ratios from 0.5 to 2.0. Cylindrical holes at a length to diameter ratio of 1.75 and 3.5 are simulated issuing into a crossflow at a Reynolds number of approximately 16,000 based on freestream velocity and hole diameter. In addition to the baseline case of vertical inflow into the plenum, flow orientation into the plenum chamber parallel to and perpendicular to the mainstream flow are investigated. The predicted results are validated with reported measurements of the flow field and surface adiabatic effectiveness. Results show that the longer delivery tubes (L/D = 3.5) have higher cooling effectiveness except in the very near field of the coolant hole. The flow orientation in the plenum is demonstrated to have a significant effect on cooling effectiveness and on flow behavior in the delivery tube and downstream of the hole. The perpendicular plenum inflow exhibits the lowest cooling effectiveness, the lowest discharge coefficients, asymmetric jetting behavior, swirl, and a lowvelocity core at the exit of the delivery tube. The parallel plenum flow orientation is shown to exhibit the highest cooling effectiveness and discharge coefficients.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLarge Eddy Simulations of Discrete Hole Film Cooling With Plenum Inflow Orientation Effects
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007667
dc.journal.fristpage11010
dc.journal.lastpage11010
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record