Show simple item record

dc.contributor.authorBeale, Steven B.
dc.contributor.authorPharoah, Jon G.
dc.contributor.authorKumar, Ashwani
dc.date.accessioned2017-05-09T00:59:35Z
dc.date.available2017-05-09T00:59:35Z
dc.date.issued2013
dc.identifier.issn0022-1481
dc.identifier.otherht_135_1_011004.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/152051
dc.description.abstractPerformance calculations for laminar fluid flow and mass transfer are presented for a passage containing cylindrical spacers configured in an inlinesquare arrangement, typical of those employed in the process industries. Numerical calculations are performed for fullydeveloped flow, based on streamwise periodic conditions for a unit cell and compared with those obtained for developing regime in a row of ten such units. The method is validated for an empty passage, i.e., a plane duct. Results are presented for the normalized mass transfer coefficient and driving force, as a function of mean flow Reynolds number, and also the wall mass flux, or blowing parameter. Both constant and variable wall velocities were considered, the latter being typical of those found in many practical membrane modules.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Study of Laminar Flow and Mass Transfer for In Line Spacer Filled Passages
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007651
dc.journal.fristpage11004
dc.journal.lastpage11004
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record