Show simple item record

dc.contributor.authorElkatatny, Salaheldin
dc.contributor.authorMahmoud, Mohamed
dc.contributor.authorNasr
dc.date.accessioned2017-05-09T00:57:55Z
dc.date.available2017-05-09T00:57:55Z
dc.date.issued2013
dc.identifier.issn0195-0738
dc.identifier.otherjert_135_04_042201.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151508
dc.description.abstractPrevious studies considered the waterbased drilling fluid filter cake as homogenous, containing one layer with an average porosity and permeability. The filter cake was recently proved to be heterogeneous, containing two layers with different properties (thickness, porosity and permeability). Heterogeneity of the filter cake plays a key role in the design of chemical treatments needed to remove the filter cake. The objectives of this study are to describe filter cake buildup under static and dynamic conditions, determine change in the filter medium properties, and obtain the local filtration properties for each layer in the filter cake. A high pressure high temperature (HPHT) filter press was used to perform the filtration process at 225 آ°F and 300 psi. A CT (computed tomography) scanner was used to measure the thickness and porosity of the filter cake. The results obtained from the CT scan showed that under static conditions, the formation of filter cake changed from compression to buildup; while under dynamic conditions, the filter cake was formed under continuous buildup. The CT results explained the changes in the thickness and porosity of each layer of the filter cake with time. The CT scans showed the change in the properties of the ceramic disk, such as porosity and permeability, which affect the calculation of the filter cake permeability. The change of the properties of the filter medium was ignored in previous studies.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFilter Cake Properties of Water Based Drilling Fluids Under Static and Dynamic Conditions Using Computed Tomography Scan
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4023483
dc.journal.fristpage42201
dc.journal.lastpage42201
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record