Show simple item record

dc.contributor.authorLeyko, Aaron B.
dc.contributor.authorGupta, Ashwani K.
dc.date.accessioned2017-05-09T00:57:53Z
dc.date.available2017-05-09T00:57:53Z
dc.date.issued2013
dc.identifier.issn0195-0738
dc.identifier.otherjert_135_3_034502.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151496
dc.description.abstractMulticomponent synthetic gas (syngas) mixtures produced from the gasification of coal, low grade fuel, wastes, and biomass offers a novel source of hydrogen production. Gasification also eliminates much of the pollutant emissions from the combustion these fuels. Palladium based membranes offer a promising method for extracting hydrogen from syngas. Experimental results are presented from a laboratory scale experimental facility. This facility was designed and built to examine various types of palladium and palladium alloy membranes for harvesting hydrogen from the syngas. The thin membranes (on the order of ∼12 خ¼m) examined were supported on porous stainlesssteel. A mixture of pure gasses consisting of hydrogen, nitrogen, and carbon dioxide were used to simulate syngas of different composition. The specific focus was on evaluating the role of operational temperature and pressure of membrane on the separation efficiency of hydrogen. Results are reported at temperatures from 325 آ°C to 400 آ°C and pressures from 5 to 30 psi (gauge) for various concentrations of hydrogen in the gas mixture. Results showed permeation to increase by up to 33% with a 75 آ°C increase in temperature. Permeation increased by over 50% with an increase in partial pressure of hydrogen by only 10 psi. These results provide clean hydrogen recovery from syngas obtained from gasification and pyrolysis of wastes and biomass.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTemperature and Pressure Effects on Hydrogen Separation From Syngas
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4024028
dc.journal.fristpage34502
dc.journal.lastpage34502
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record