Show simple item record

dc.contributor.authorLi, Jun
dc.contributor.authorGuo, Boyun
dc.contributor.authorLing, Kegang
dc.date.accessioned2017-05-09T00:57:51Z
dc.date.available2017-05-09T00:57:51Z
dc.date.issued2013
dc.identifier.issn0195-0738
dc.identifier.otherjert_135_3_031501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151482
dc.description.abstractWith the downturn in natural gas prices, it is vitally important to reduce the cost of drilling shale gas wells. Gaspercussion drilling has been recently employed in shale gas field development. It increases footage capacity by nearly 60%. However, wellbore erosion by the highvelocity gas has been recognized as a problem that hinders further application of the technology. This paper investigates a potential solution to the problem using a new type of flowdiverting joint (FDJ). The FDJ with exchangeable nozzles can be installed at the shoulder of the drill collar to partially bypass gas flow into the annulus between the drill pipe and open hole. Hydraulics computations with a stateoftheart computer program indicate that this technique will allow for the use of highgas injection rate to carry drill cuttings while reducing the gas flow rate through the drill bit. As a result, the gas velocity in the drill collar–open hole annulus can be maintained at a safe level to prevent hole erosion. The reduced gas flow rate through the drill bit also minimizes wellbore enlargement at hole bottom. Sensitivity analyses with the computer program show that the FDJnozzle area to bitnozzle area ratio is directly proportional to the annulus area ratio, and the bypassed flow rate fraction remains constant as drilling progresses. This makes the FDJ system easy to design and practical to use over a long section of hole to be drilled.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Diverting for Reducing Wellbore Erosion in Gas Drilling Shale Gas Wells
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4023791
dc.journal.fristpage31501
dc.journal.lastpage31501
dc.identifier.eissn1528-8994
dc.treeJournal of Energy Resources Technology:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record