Show simple item record

dc.contributor.authorSteinboeck, Andreas
dc.contributor.authorKemmetmأ¼ller, Wolfgang
dc.contributor.authorLassl, Christoph
dc.contributor.authorKugi, Andreas
dc.date.accessioned2017-05-09T00:57:34Z
dc.date.available2017-05-09T00:57:34Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_06_061010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151376
dc.description.abstractIn many hydraulic systems, it is difficult for human operators to detect faults or to monitor the condition of valves. Based on dynamical models of an electrohydraulic servo valve and a hydraulic positioning unit, we develop a parametric fault detection and condition monitoring system for the valve. Our approach exploits the nexus between the spool position, the geometric orifice area, the flow conditions at wearing control edges, and the velocity of the controlled cylinder. The effective orifice area of each control edge is estimated based on measurement data and described by aggregate wear parameters. Their development is monitored during the service life of the valve, which allows consistent tracking of the condition of the valve. The method is suitable for permanent in situ condition monitoring. Flow measurements are not required. Computer simulations and measurement results from an industrial plant demonstrate the feasibility of the method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Based Condition Monitoring of an Electro Hydraulic Valve
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4024800
dc.journal.fristpage61010
dc.journal.lastpage61010
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record