Show simple item record

dc.contributor.authorEun, Yongsoon
dc.contributor.authorGross, Eric M.
dc.contributor.authorKabamba, Pierre T.
dc.contributor.authorMeerkov, Semyon M.
dc.contributor.authorMenezes, Amor A.
dc.contributor.authorOssareh, Hamid R.
dc.date.accessioned2017-05-09T00:57:29Z
dc.date.available2017-05-09T00:57:29Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_05_051012.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151352
dc.description.abstractThis paper considers the problem of controlling rotating machinery with actuators and sensors fixed in inertial space. Such a problem arises in control of charging and fusing stages in the xerographic process, drilling and milling machines, and turbo machinery. If a rotating device is represented as a set of discrete wedges, the resulting system can be conceptualized as a set of plants (wedges) with a single actuator and sensor. In such architecture, each plant can be controlled only intermittently, in a stroboscopic manner. This leads to the problem of cyclic control (CC) considered in this paper. Specifically, the problem of stabilizability in CC architecture is considered, and the resulting stabilizability conditions are compared with those in the usual, permanently acting control (PAC). In this regard, it is shown that the domain of asymptotic stability under CC is an open disc in the open left half plane (OLHP), rather than the OLHP itself, and the controller gains that place the closed loop poles at the desired locations under CC are N times larger than those under PAC, where N is the number of wedges. The results are applied to temperature stabilization of the fusing stage of a xerographic process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCyclic Control: Problem Formulation and Stability Analysis
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4024201
dc.journal.fristpage51012
dc.journal.lastpage51012
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record