Show simple item record

dc.contributor.authorWilson, William R.
dc.contributor.authorJones, Laura L.
dc.contributor.authorPeck, Mason A.
dc.date.accessioned2017-05-09T00:57:27Z
dc.date.available2017-05-09T00:57:27Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_4_045001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151339
dc.description.abstractIn the past several years, small satellites have taken on an increasingly important role as affordable technology demonstrators and are now being viewed as viable lowcost platforms for traditional spacecraft mission objectives. As such, the CubeSat standard (1 kg in a 10 cm cube) has been widely adopted for universityled development efforts even as it is embraced by traditional spacecraft developers, such as NASA. As CubeSats begin to take on roles traditionally filled by much larger spacecraft, the infrastructure for dynamics and controls testing must also transition to accommodate the different size and cost scaling associated with CubeSats. While airbearingbased testbeds are commonly used to enable a variety of traditional ground testing and development for spacecraft, few existing designs are suitable for development of CubeSatscale technologies, particularly involving multibody dynamics. This work describes Cornell University's FloatCube testbed, which provides a planar reducedfriction environment for multibody dynamics and controls technology development for spacecraft less than 6 kg and a 15 cm cube. The multimodule testbed consists of four freefloating airbearing platforms with onboard gas supplies that allow the platforms to float over a glass surface without external attachments. Each of these platforms, or FloatCubes, can host CubeSatsized payloads at widely ranging levels of development, from prototype components to fullscale systems. The FloatCube testbed has already hosted several successful experiments, proving its ability to provide an affordable reducedfriction environment to CubeSatscale projects. This paper provides information on the system design, cost, performance, operating procedures, and applications of this unique, and increasingly relevant, testbed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Multimodule Planar Air Bearing Testbed for CubeSat Scale Spacecraft
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4023767
dc.journal.fristpage45001
dc.journal.lastpage45001
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record