Show simple item record

dc.contributor.authorFan, Jinhua
dc.contributor.authorZhang, Youmin
dc.contributor.authorZheng, Zhiqiang
dc.date.accessioned2017-05-09T00:57:25Z
dc.date.available2017-05-09T00:57:25Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_4_041008.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151323
dc.description.abstractA challenging problem on observerbased, integrated fault diagnosis and faulttolerant control for linear systems subject to actuator faults and control input constraints is studied in this paper. An adaptive observer approach is used for the joint statefault magnitude estimation, and a feedback controller is designed to stabilize the closedloop system without violating the actuator limits in the presence of actuator faults. Matrix inequality conditions are provided for computation of design parameters of the observer and the feedback controller, and the admissible initial conditions and estimation errors are bounded by invariant ellipsoidal sets. The design results are closely related to the fault magnitude and variation rate, and a necessary condition on the admissible fault magnitudes dependent on the control limits is directly obtained from the design process. The proposed design framework allows a direct application of the pole placement method to obtain stabilization results. To improve the system performance, a nonlinear programmingbased optimization algorithm is proposed to compute an optimized feedback gain, whereas the one obtained by pole placement can be taken as an initial feasible solution for nonlinear optimization. Numerical studies with two flight control systems demonstrate the effectiveness of proposed design techniques.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAdaptive Observer Based Integrated Fault Diagnosis and Fault Tolerant Control Systems Against Actuator Faults and Saturation
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4023763
dc.journal.fristpage41008
dc.journal.lastpage41008
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record