Show simple item record

dc.contributor.authorHsiao, Tesheng
dc.contributor.authorWeng, Mao
dc.date.accessioned2017-05-09T00:57:22Z
dc.date.available2017-05-09T00:57:22Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_3_031010.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151298
dc.description.abstractMost manipulator motion controllers require joint velocity feedback. Whenever joint velocities are not measurable, they are estimated from the joint positions. However, velocity estimates tend to be inaccurate under lowspeed motion or low sensor resolution conditions. Moreover, velocity estimators may either be susceptible to model uncertainties or introduce additional dynamics (e.g., phase lag) to the control loop. Consequently, direct substitution of velocity estimates into the controller results in the deterioration of the control performance and robustness margin. Therefore, this paper proposes a robust positionfeedback motion controller which gets rid of the problems of uncompensated dynamics and model uncertainties introduced by velocity estimators. Furthermore, a globally asymptotically stable system, which is robust with respective to model parameter variations, is guaranteed. Theoretical analysis and experimental verifications are carried out. The results demonstrate that the proposed controller is robust and outperforms the conventional computed torque plus proportional integral differential (PID) controller.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRobust Joint Position Feedback Control of Robot Manipulators
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4023669
dc.journal.fristpage31010
dc.journal.lastpage31010
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record