Show simple item record

dc.contributor.authorShi, Yibing
dc.contributor.authorWu, Jianping
dc.contributor.authorNusholtz, Guy S.
dc.date.accessioned2017-05-09T00:57:21Z
dc.date.available2017-05-09T00:57:21Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_3_031007.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151295
dc.description.abstractThe optimal restraint for minimizing the peak thoracic compression of the SIDIIs side crash test dummy subjected to a prescribed impact is studied using a linear springmass model. This model consists of the thoracic and pelvic masses and three springs which connect the masses and interface them with an impacting surface through the restraint. The problem is posed as an optimal control problem, with the restraint, which could be any physical structure (e.g., an airbag) operating in a finite allowable space, treated as a displacement control element. Via an assumption of the linearity of the dummy model and a discretization scheme, the problem is approximated and transformed into a linear programming problem for numerical solution. Numerical solutions are obtained under different prescribed impacting surface motion histories, different restraint space values, and constraints on dummy responses. Results show that the general characteristics of the optimal restraint response is a rapid ramp up in velocity in the very beginning of the event, followed by a period of lower level of loading where the thoracic compression builds up, and then an approximately constant acceleration to maintain the compression. The corresponding theoretically minimum thoracic compression values under the various conditions studied are presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimal Restraint for the Thoracic Compression of the SID IIs Crash Dummy Using a Linear Spring Mass Model
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4023397
dc.journal.fristpage31007
dc.journal.lastpage31007
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record