Show simple item record

dc.contributor.authorJujnovich, B. A.
dc.contributor.authorCebon, D.
dc.date.accessioned2017-05-09T00:57:21Z
dc.date.available2017-05-09T00:57:21Z
dc.date.issued2013
dc.identifier.issn0022-0434
dc.identifier.otherds_135_3_031006.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/151294
dc.description.abstractPassive steering systems have been used for some years to control the steering of trailer axles on articulated vehicles. These normally use a “command steerâ€‌ control strategy, which is designed to work well in steadystate circles at low speeds, but which generates inappropriate steer angles during transient lowspeed maneuvers and at high speeds. In this paper, “activeâ€‌ steering control strategies are developed for articulated heavy goods vehicles. These aim to achieve accurate path following for tractor and trailer, for all paths and all normal vehicle speeds, in the presence of external disturbances. Controllers are designed to implement the pathfollowing strategies at low and high speeds, whilst taking into account the complexities and practicalities of articulated vehicles. At low speeds, the articulation and steer angles on articulated heavy goods vehicles are large and smallangle approximations are not appropriate. Hence, nonlinear controllers based on kinematics are required. But at highspeeds, the dynamic stability of control system is compromised if the kinematicsbased controllers remain active. This is because a key state of the system, the sideslip characteristics of the trailer, exhibits a signchange with increasing speeds. The low and high speed controllers are blended together using a speeddependent gain, in the intermediate speed range. Simulations are conducted to compare the performance of the new steering controllers with conventional vehicles (with unsteered drive and trailer axles) and with vehicles with command steer controllers on their trailer axles. The simulations show that active steering has the potential to improve significantly the directional performance of articulated vehicles for a wide range of conditions, throughout the speed range.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePath Following Steering Control for Articulated Vehicles
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4023396
dc.journal.fristpage31006
dc.journal.lastpage31006
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record