Show simple item record

dc.contributor.authorD. J. Taylor
dc.contributor.authorT. R. Watkins
dc.contributor.authorC. R. Hubbard
dc.contributor.authorM. R. Hill
dc.contributor.authorW. A. Meith
dc.date.accessioned2017-05-09T00:54:15Z
dc.date.available2017-05-09T00:54:15Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150181
dc.description.abstractTantalum refractory liners were explosively clad into cylindrical pressure vessels, some of which had been previously autofrettaged. Using explosive cladding, the refractory liner formed a metallurgical bond with the steel of the pressure vessel at a cost of induced strain. Two techniques were employed to determine the residual stress state of the clad steel cylinders: neutron diffraction and mechanical slitting. Neutron diffraction is typically nondestructive; however, due to attenuation along the beam path, the cylinders had to be sectioned into rings that were nominally 25 mm thick. Slitting is a destructive method, requiring the sectioning of the cylindrical samples. Both techniques provided triaxial stress data and useful information on the effects of explosive cladding. The stress profiles in the hoop and radial directions were similar for an autofrettaged, nonclad vessel and a clad, nonautofrettaged vessel. The stress profiles in the axial direction appeared to be different. Further, the data suggested that residual stresses from the autofrettage and explosive cladding processes were not additive, in part due to evidence of reverse yielding. The residual stress data are presented, compared and discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Measurements of Explosively Clad Cylindrical Pressure Vessels
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004615
dc.journal.fristpage11501
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsMeasurement
dc.keywordsCladding systems (Building)
dc.keywordsNeutron diffraction AND Residual stresses
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record