Show simple item record

dc.contributor.authorH.-T. Liu
dc.contributor.authorY. Hovanski
dc.contributor.authorM. E. Dahl
dc.date.accessioned2017-05-09T00:54:15Z
dc.date.available2017-05-09T00:54:15Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011405_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150180
dc.description.abstractLaboratory tests were conducted to determine the fatigue performance of abrasive-waterjet- (AWJ-) machined aircraft titanium. Dog-bone specimens machined with AWJs were prepared and tested with and without sanding and dry-grit blasting with Al2 O3 as the secondary processes. The secondary processes were applied to remove the visual appearance of AWJ-generated striations and to clean up the garnet embedment. The fatigue performance of AWJ-machined specimens was compared with baseline specimens machined with Computer Numerical Control (CNC) milling. Fatigue test results of the titanium specimens not only confirmed our previous findings in aluminum dog-bone specimens but also further enhanced the fatigue performance of the titanium. In addition, titanium is known to be difficult to cut, particularly for thick parts, however, AWJs cut the material 34% faster than stainless steel. AWJ cutting and dry-grit blasting are shown to be a preferred combination for processing aircraft titanium that is fatigue critical.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMachining of Aircraft Titanium With Abrasive-Waterjets for Fatigue Critical Applications
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004834
dc.journal.fristpage11405
dc.identifier.eissn1528-8978
dc.keywordsFatigue
dc.keywordsAluminum
dc.keywordsMachining
dc.keywordsBlasting
dc.keywordsBone
dc.keywordsAircraft
dc.keywordsTitanium
dc.keywordsComputer numerical control machine tools
dc.keywordsMilling
dc.keywordsFatigue life
dc.keywordsFatigue testing AND Cutting
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record