Show simple item record

dc.contributor.authorNatalia Petrova
dc.contributor.authorAbdel-Hakim Bouzid
dc.date.accessioned2017-05-09T00:54:13Z
dc.date.available2017-05-09T00:54:13Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011207_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150169
dc.description.abstractDespite the fact that multipass shell-and-tube heat exchangers operating at high temperature are subject to frequent problems related to flange sealing, there is neither detailed explanations for the reasons of the failures nor an adequate solution to this problem. Specific geometry of multipass heat exchangers and the temperature difference between the inlet and the outlet fluids is responsible for the existence of a thermal circumferential gradient at the shell-to-channel bolted joint. However, existing flange design methods do not address nonaxisymmetrical temperature loading of the flanged joint assembly. The circumferential thermal gradient, as the cause of frequent failures to seal the flanged joints, is ignored. This paper outlines the analytical modeling of a flanged joint with a tube sheet of a multipass heat exchanger subjected to a nonaxisymmetrical thermal loading. A shell-and-tube heat exchanger of 51 in. diameter with cocurrent flow was used for analysis. The main steps of the theoretical analysis used for the determination of the circumferential temperature profiles and the thermal expansion displacements and distortions of the bolted joint components are given. The results from the proposed analytical model are compared with those obtained from finite element models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeflections of A Multipass Shell-and-Tube Heat Exchanger Bolted Joint Subjected to Nonaxisymmetric Thermal Loading
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004623
dc.journal.fristpage11207
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsFlanges
dc.keywordsHeat exchangers
dc.keywordsShells
dc.keywordsFlow (Dynamics)
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsDeflection
dc.keywordsTemperature distribution
dc.keywordsGeometry AND Manufacturing
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record