Show simple item record

dc.contributor.authorXianjie Yang
dc.contributor.authorZhijun Wu
dc.contributor.authorAidong Meng
dc.contributor.authorSayed A. Nassar
dc.date.accessioned2017-05-09T00:54:12Z
dc.date.available2017-05-09T00:54:12Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011206_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150168
dc.description.abstractThe nonlinear plastic deformation behavior of a clamped bolted joint model under a separating service load is investigated using analytical, finite element, and experimental techniques. An elastic-plastic model is used for the bolt material while the joint material remains in the linear elastic range. Both the analytical and finite element analysis (FEA) models investigate the variation in the tension of a preloaded bolt due to a separating service load that acts with an offset from the bolt center. Experimental verification is provided for both the analytical and finite element results on the bolt tension variation, clamp load variation and the clamp load loss caused by the incremental plastic bolt elongation under cyclic separating force.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Behavior of Preloaded Bolted Joints Under a Cyclic Separating Load
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004614
dc.journal.fristpage11206
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsStress
dc.keywordsClamps (Tools)
dc.keywordsTension
dc.keywordsDeformation
dc.keywordsThread AND Friction
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record