Show simple item record

dc.contributor.authorRongsheng Li
dc.contributor.authorZengliang Gao
dc.contributor.authorYuebao Lei
dc.date.accessioned2017-05-09T00:54:12Z
dc.date.available2017-05-09T00:54:12Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150164
dc.description.abstractA global limit load solution is derived in this paper for embedded off-set elliptical cracks in a plate under combined tension and bending, based on the net-section collapse principle. The new limit load solution is validated using 3D elastic-perfectly plastic finite element (FE) limit analyses. The results show that the limit load solution developed in this paper is conservative and close to the elastic-perfectly-plastic FE results. The global limit load solution is then compared with the limit load solution based on the rectangular crack assumption, showing that the difference between the two solutions is negligible as the ratio of crack length to the plate width is less than 0.25. However, the difference may become significant when the ratio approaches one.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Global Limit Load Solution for Plates With Embedded Off-Set Elliptical Cracks Under Combined Tension and Bending
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004819
dc.journal.fristpage11204
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsTension AND Plates (structures)
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record