Show simple item record

dc.contributor.authorTianbai Li
dc.contributor.authorHaofeng Chen
dc.contributor.authorWeihang Chen
dc.contributor.authorJames Ure
dc.date.accessioned2017-05-09T00:54:12Z
dc.date.available2017-05-09T00:54:12Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28556#011203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150163
dc.description.abstractThis paper presents the ratchet limit analysis of a pipe with an axisymmetric circumferential crack in a mismatched weld by using the extended linear matching method (LMM). Two loading conditions are considered: (i) a cyclic temperature load and a constant internal pressure and (ii) a cyclic temperature load and a constant axial tension. Individual effects of (i) the geometry of the Weld Metal (WM), (ii) the size of the crack, (iii) the location of the crack, and (iv) the yield stress of WM on the ratchet limits, maximum temperature ranges to avoid ratchetting, and limit loads are investigated. Influence functions of the yield stress of WM on the maximum temperature ranges and limit loads are generated. The results confirm the applicability of the extended LMM to the cracked welded pipe.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Ratchet Analysis of a Cracked Welded Pipe
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004802
dc.journal.fristpage11203
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsPipes
dc.keywordsTension
dc.keywordsPressure AND Yield stress
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record