Show simple item record

dc.contributor.authorJ. Wang
dc.contributor.authorD. S. Weaver
dc.date.accessioned2017-05-09T00:54:10Z
dc.date.available2017-05-09T00:54:10Z
dc.date.copyrightApril, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28561#021302_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150151
dc.description.abstractAn experimental study was carried out to investigate fluidelastic instability in finned tube bundles in normal and parallel triangular arrays. Three arrays of each geometry type were studied experimentally: two arrays with serrated, helically wound finned tubes of different fin densities, and a bare tube array with the same base diameter as the finned tubes. All six tube arrays studied had the same tube pitch. The finned tubes under consideration were commercial finned tubes typically used in the fossil and process industries. For the purpose of the present investigation, the concept of “effective diameter” of a finned tube, as previously used to predict vortex shedding, was used to compare the finned tube results with other finned tube results as well as the existing bare tube world data. The experimental results for the triangular arrays show that the fin’s structure strongly influences the fluidelastic stability of finned tube bundles and the fin pitch is demonstrated to reduce the difference in the stability threshold between the tube array geometries as the fin density increases. Overall, the effect of serrated fins on fluidelastic instability is very complex and array geometry dependent, stabilizing some arrays and destabilizing others. Clearly, the effect of fins cannot be accounted for by the simple use of an effective diameter of an equivalent bare tube. An earlier version of this paper appeared at the ASME 2010 FSI Conference, FEDSM-ICNMM2010-30223.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFluidelastic Instability in Normal and Parallel Triangular Arrays of Finned Tubes
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004621
dc.journal.fristpage21302
dc.identifier.eissn1528-8978
dc.keywordsDensity
dc.keywordsStability
dc.keywordsFins
dc.keywordsGeometry
dc.keywordsVortex shedding
dc.keywordsFlow (Dynamics)
dc.keywordsWind tunnels
dc.keywordsFluid structure interaction AND Process industries
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record