Show simple item record

dc.contributor.authorBostjan Bezensek
dc.contributor.authorYinsheng Li
dc.contributor.authorPhuong H. Hoang
dc.contributor.authorKunio Hasegawa
dc.date.accessioned2017-05-09T00:54:05Z
dc.date.available2017-05-09T00:54:05Z
dc.date.copyrightJune, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28567#031003_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150129
dc.description.abstractPiping systems in power plant may experience combined bending-torsion loads in the presence of planar crack-like flaws. ASME Boiler and Pressure Vessel Code Section XI nonmandatory Appendix C provides flaw evaluation procedures for pipes with flaws. These are currently limited to straight pipes under pressure and bending loads and no provision is made for torsion loading. The working group on pipe flaw evaluation is developing guidance for including the torsion load within the existing solutions provided in the Appendix C for bending loading on a straight pipe under fully plastic fracture regime. This paper reports on the finite element limit load analyses performed on the straight pipe containing a circumferential planar crack-like flaw. Pipe diameters were ranging from 4 in. (100 mm) to 24 in. (600 mm) nominal diameter (OD) and R/t ranging from 6 to 40. For the purpose of nonmandatory Appendix C flaw evaluation, it is concluded that the torsion loads can be combined with bending loads using the root of the sum of the squares (RSS) method of Section III of the ASME Boiler Code, without any additional weighting on torsion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInclusion of Torsion Loads in Section XI Flaw Evaluation Procedures for Pipes Containing Circumferential Planar Surface Crack-Like Flaws on the Basis of Limit Load Analysis
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4005875
dc.journal.fristpage31003
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsTorsion
dc.keywordsFracture (Materials)
dc.keywordsPipes AND Collapse
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record