Show simple item record

dc.contributor.authorE. Troiano
dc.contributor.authorJ. H. Underwood
dc.contributor.authorA. M. Venter
dc.contributor.authorJ. H. Izzo
dc.contributor.authorJ. M. Norray
dc.date.accessioned2017-05-09T00:54:01Z
dc.date.available2017-05-09T00:54:01Z
dc.date.copyrightAugust, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926073#041012_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150106
dc.description.abstractIdeal isotropic or kinematic hardening is often utilized in order to simplify the modeling of the loading and reverse loading behavior of materials when using finite element analysis. Unfortunately, this simplification can result in significant error if the material exhibits the Bauschinger effect (BE), which is the loss of strength of the material upon reverse loading. The error associated with this simplification is further compounded in heavily autofrettaged, Cr-Mo-V, thick walled cylinders due to the fact that the Bauschinger effect and the reverse loading strain hardening exponent are a strong function of the initial applied plastic strains, which can vary significantly throughout the wall of the cylinder.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImproved Finite Element Model to Predict the Reverse Loading Behavior of Autofrettaged A723 and HB7 Cylinders
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006603
dc.journal.fristpage41012
dc.identifier.eissn1528-8978
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsCylinders
dc.keywordsFinite element model
dc.keywordsNeutron diffraction
dc.keywordsWork hardening
dc.keywordsSteel
dc.keywordsStress
dc.keywordsErrors
dc.keywordsYield strength
dc.keywordsHardening AND X-rays
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record