Show simple item record

dc.contributor.authorRamadan A. Esmaeel
dc.contributor.authorMohamed A. Khan
dc.contributor.authorFarid Taheri
dc.date.accessioned2017-05-09T00:53:59Z
dc.date.available2017-05-09T00:53:59Z
dc.date.copyrightAugust, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926073#041702_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150095
dc.description.abstractThe use of composite materials for repair and rehabilitation of corroded steel pipes has been increasingly growing in the oil and gas industry. However, there exists a noticeable gap in the literature on the long term performance of composite repaired pipes, especially those subjected to large internal pressure magnitudes. This work is an attempt toward filing the gap by gaining a better understanding of the effects of environmental conditions on the long term performance of composite repaired pipes subjected to large internal pressures. Finite element method (FEM) is used to simulate typical composite warp-repaired gouged steel pipes, conditioned in various environments and subsequently subjected to internal pressure. The influence of the resulting degradation in composite’s mechanical properties on the performance of the system was evaluated. To validate the results, an experimental program was designed and carried out. Repaired specimens were conditioned in an environmental chamber under certain thermal and moisture conditions; then, the specimens were tested to failure subject to internal pressure. Good correlation was obtained after fine tuning of FEM model’s material data through the use of the experimentally obtained data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of the Environmental Effects on the Performance of FRP Repaired Steel Pipes Subjected to Internal Pressure
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4005944
dc.journal.fristpage41702
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsFiber reinforced plastics
dc.keywordsPressure AND Steel
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record