Show simple item record

dc.contributor.authorAbu Naim Md Rafi
dc.contributor.authorRichard Kania
dc.contributor.authorRick Wang
dc.contributor.authorSreekanta Das
dc.contributor.authorHossein Ghaednia
dc.contributor.authorJorge Silva
dc.date.accessioned2017-05-09T00:53:58Z
dc.date.available2017-05-09T00:53:58Z
dc.date.copyrightAugust, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926073#041101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150084
dc.description.abstractOil and gas transmission pipelines can be subjected to concentrated lateral loads and as a result, a dent can form. A dent is a localized defect in the pipe wall in the form of a permanent inward plastic deformation. This kind of defect is a matter of serious concern for the pipeline operator since a rupture or a leak may occur. Dent may not pose an immediate threat to the structural integrity of a pipeline. However, it can possibly hinder the operational and inline inspection activities. In the long run, it can cause a leak or rupture in the pipeline under sustained or cyclic pressure load. Hence, AMSE B31.8 recommends a strain-based criterion for the assessment of dents. This strain-based criterion was developed based on several assumptions. This study was undertaken using full-scale laboratory tests and finite element analyses to review and revisit the ASME strain-based dent evaluation criterion and its assumptions. It was found that some of these assumptions are incorrect, and hence, this dent evaluation criterion can lead to inaccurate estimations of critical (effective) strain values in dents, which in turn can lead to inaccurate assessments of the dents.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRevisiting ASME Strain-Based Dent Evaluation Criterion
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4005890
dc.journal.fristpage41101
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsPipes
dc.keywordsFinite element model
dc.keywordsMembranes
dc.keywordsDeformation
dc.keywordsPipelines
dc.keywordsRupture AND Leakage
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record