Show simple item record

dc.contributor.authorMark Stonehouse
dc.contributor.authorShinichiro Kanamaru
dc.contributor.authorShawn Morrison
dc.contributor.authorTrevor G. Seipp
dc.date.accessioned2017-05-09T00:53:58Z
dc.date.available2017-05-09T00:53:58Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926074#054502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150081
dc.description.abstractThere exist some atypical loads on pressure vessels during transportation. This is particularly true when the pressure vessel weighs over 500 tonnes. In this example vessel, the transportation was via rail on a “Schnabel car,” in which the vessel is suspended horizontally between the top nozzle and the skirt, and a significant axial compressive load is applied. During the evaluation of the stresses in the top head, a particularly novel situation was encountered which brought about some interesting issues with regards to the three design-by-analysis methods: elastic, limit load, and elastic-plastic. This paper discusses the comparison between all three of these design-by-analysis methods, and provides recommendations for which is most appropriate for this type of evaluation. Additional recommendations and warnings are provided for the use of the elastic and limit load methods as well.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Novel Comparison of Design-by-Analysis Methods
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006343
dc.journal.fristpage54502
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsDesign
dc.keywordsBuckling
dc.keywordsElastic analysis
dc.keywordsFailure
dc.keywordsVessels AND Nozzles
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record