Show simple item record

dc.contributor.authorLindsay R. Baxter
dc.contributor.authorStephen P. Harris
dc.date.accessioned2017-05-09T00:53:57Z
dc.date.available2017-05-09T00:53:57Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926074#051601_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150075
dc.description.abstractSavannah River Remediation, LLC (SRR) is implementing a statistical sampling strategy for in-service inspection (ISI) of liquid waste (LW) tanks at the United States Department of Energy’s Savannah River Site (SRS) in Aiken, South Carolina. As a component of SRS’s corrosion control program (CCP), the ISI program assesses tank wall structural integrity through the use of ultrasonic testing (UT). The statistical strategy for ISI is based on the random sampling of a number of vertically-oriented unit areas, called “strips,” within each tank. The number of strips to inspect was determined so as to attain, over time, a high probability of observing at least one strip of the worst 5% in terms of pitting and corrosion across all tanks. The hypergeometric distribution was used in the probability estimation to determine the number of strips for inspection. In addition to the strip sampling strategy, a single strip within each tank was identified to serve as the baseline for a longitudinal assessment of the tank safe operational life. Statistical tolerance limits for pit depth and corrosion rates were calculated using existing data and will be updated as additional inspections are made. The statistical tolerance limits provide conservative estimates for use in tank life projections. The statistical sampling strategy enables the ISI program to develop individual profiles of LW tank wall structural integrity that collectively provide a high confidence in storage tank safety and integrity over operational lifetimes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStatistical Sampling for In-Service Inspection of Underground Storage Tanks (PVP2011-57011)
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4005935
dc.journal.fristpage51601
dc.identifier.eissn1528-8978
dc.keywordsInspection
dc.keywordsSampling (Acoustical engineering)
dc.keywordsCorrosion
dc.keywordsSampling methods
dc.keywordsStrips
dc.keywordsIn-service inspection
dc.keywordsProbability
dc.keywordsWall thickness
dc.keywordsMeasurement
dc.keywordsService life (Equipment)
dc.keywordsSafety AND Underground storage
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record