Show simple item record

dc.contributor.authorKirsten Plante
dc.contributor.authorChoon-Lai Tan
dc.date.accessioned2017-05-09T00:53:56Z
dc.date.available2017-05-09T00:53:56Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926074#051204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150068
dc.description.abstractThe boundary element method is employed to determine polynomial influence coefficients of stress intensity factors, KI , for a semi-elliptical crack in internally pressurized thick-walled curved tubing. Numerical results of these coefficients are obtained for a wide range of geometric parameters; they are the bend radius ratio, cross-sectional radius ratio, angular extent of the bend, and relative crack depth. The use of influence coefficients allows KI solutions to be determined for different load cases without repetitive 3D stress analysis of the cracked body. This is demonstrated for the case of autofrettage where the effects on KI of the residual stresses arising from it are presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence Coefficients of Stress Intensity Factors for Curved Tubing With a Semi-Elliptical Crack
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006857
dc.journal.fristpage51204
dc.identifier.eissn1528-8978
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsTubing
dc.keywordsFracture (Materials)
dc.keywordsAutofrettage
dc.keywordsBoundary element methods AND Polynomials
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record