Show simple item record

dc.contributor.authorMichael C. Gibson
dc.contributor.authorAmer Hameed
dc.contributor.authorJohn G. Hetherington
dc.date.accessioned2017-05-09T00:53:56Z
dc.date.available2017-05-09T00:53:56Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926074#051203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150066
dc.description.abstractSwaging is one method of autofrettage, a means of prestressing high-pressure vessels to increase their fatigue lives and load bearing capacity. Swaging achieves the required deformation through physical interference between an oversized mandrel and the bore diameter of the tube, as it is pushed along and through the bore of the tube. A finite element (FE) model of the swaging process, developed previously by the author in ANSYS , was configured for comparison with an earlier model; this allowed the accuracy of further properties of the ANSYS model to be investigated. Driving force was the main property of interest, specifically how it varied with mandrel slopes and parallel midsection, to allow direct comparison with the earlier model. The variation of driving force with respect to coefficient of friction was investigated; driving force increased in near proportion, but a subtle trend indicated a further study of stress component be made. This was followed by a two-pass swage process. Close agreement was found with empirical data and the discrepancies observed between the two models are explained by the relatively coarse mesh used by the earlier model. This further verifies the sensitivity of the model described here.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of Driving Force Variation During Swage Autofrettage, Using Finite Element Analysis
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006922
dc.journal.fristpage51203
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsStress
dc.keywordsAutofrettage AND Friction
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record