Show simple item record

dc.contributor.authorMatthew J. Vick
dc.contributor.authorKurt Gramoll
dc.date.accessioned2017-05-09T00:53:56Z
dc.date.available2017-05-09T00:53:56Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926074#051201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150064
dc.description.abstractIn this research, an analysis technique is developed to model orthotropic composite toroids and optimize the fiber layup, accounting for the natural variation in thickness due to fiber stacking. The behavior of toroids is difficult to model using membrane shell theories due to a singularity in the strain-displacement relations occurring at the toroid crest that yields discontinuous displacement results. A technique is developed here where the constitutive properties of multilayered toroidal shells are determined using lamination theory, and the toroid strains and line loads are determined using finite element analysis. The toroid strains are rotated into the fiber directions, allowing the fiber stress and transverse stress distributions to be determined for each layer. The fiber layup is modified heuristically until an optimum is found. An optimum is reached when the maximum fiber and transverse direction stresses of each shell layer are equal, minimizing wasted fibers and excess weight. Test cases are analyzed to verify the accuracy of the finite element model and an example composite toroid with Kevlar/epoxy material properties is optimized. The analysis technique developed here can decrease the time and cost associated with the development of orthotropic toroidal pressure vessels, resulting in lighter, cheaper, and more optimal structures. The models developed can be expanded to include a steel liner and a broader range of fiber winding patterns.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Study on the Optimization of an Orthotropic Composite Toroidal Shell
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4005873
dc.journal.fristpage51201
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsOptimization
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsShells
dc.keywordsThickness
dc.keywordsFinite element model AND Laminates
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record