Show simple item record

dc.contributor.authorLuca Esposito
dc.contributor.authorNicola Bonora
dc.date.accessioned2017-05-09T00:53:53Z
dc.date.available2017-05-09T00:53:53Z
dc.date.copyright41244
dc.date.issued2012
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-926532#pvt_134_6_061401.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/150049
dc.description.abstractIn high temperature design, the accumulation of creep strain during the primary stage has to be considered since most of the allowable design strain occurs in this stage. In this work, assuming that the creep rate in the transient regime can be given as a fraction of the steady state creep rate and function of the internal stress, a mechanism based model for primary creep has been derived. Taking into account that the apparent activation energy varies with the internal stress, which evolves with creep strain, an exponential form of the creep rate versus creep strain has been obtained. The proposed model for primary creep requires the identification of two material parameters only which are shown to be function of the applied stress and independent of temperature. The proposed model has been validated for high chromium steel P91.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrimary Creep Modeling Based on the Dependence of the Activation Energy on the Internal Stress
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4006856
dc.journal.fristpage61401
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsStress
dc.keywordsSteady state AND Temperature
dc.treeJournal of Pressure Vessel Technology:;2012:;volume( 134 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record