Show simple item record

dc.contributor.authorKarthik K. Bodla
dc.contributor.authorJayathi Y. Murthy
dc.contributor.authorSuresh V. Garimella
dc.date.accessioned2017-05-09T00:52:34Z
dc.date.available2017-05-09T00:52:34Z
dc.date.copyrightJanuary, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27930#012602_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149576
dc.description.abstractPorous sintered microstructures are critical to the functioning of passive heat transport devices such as heat pipes. The topology and microstructure of the porous wick play a crucial role in determining the thermal performance of such devices. Three sintered copper wick samples employed in commercial heat pipes are characterized in this work in terms of their thermal transport properties––porosity, effective thermal conductivity, permeability, and interfacial heat transfer coefficient. The commercially available samples of nearly identical porosities (∼61% open volume) are CT scanned at 5.5 μm resolution, and the resulting image stack is reconstructed to produce high-quality finite volume meshes representing the solid and interstitial pore regions, with a conformal mesh at the interface separating these two regions. The resulting mesh is then employed for numerical analysis of thermal transport through fluid-saturated porous sintered beds. Multiple realizations are employed for statistically averaging out the randomness exhibited by the samples under consideration. The effective thermal conductivity and permeability data are compared with analytical models developed for spherical particle beds. The dependence of effective thermal conductivity of sintered samples on the extent of sintering is quantified. The interfacial heat transfer coefficient is compared against a correlation from the literature based on experimental data obtained with spherical particle beds. A modified correlation is proposed to match the results obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDirect Simulation of Thermal Transport Through Sintered Wick Microstructures
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004804
dc.journal.fristpage12602
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsFluids
dc.keywordsPermeability
dc.keywordsCopper
dc.keywordsParticulate matter
dc.keywordsThermal conductivity
dc.keywordsComputation
dc.keywordsEquations
dc.keywordsPorosity
dc.keywordsMesh generation
dc.keywordsHeat pipes
dc.keywordsSimulation
dc.keywordsNecking
dc.keywordsWater
dc.keywordsReynolds number
dc.keywordsPorous materials
dc.keywordsFlow (Dynamics)
dc.keywordsMetals
dc.keywordsTemperature
dc.keywordsBoundary-value problems
dc.keywordsFriction
dc.keywordsImage segmentation
dc.keywordsSintering AND Image processing
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record