Show simple item record

dc.contributor.authorIn Taek Oh
dc.contributor.authorKyung Min Kim
dc.contributor.authorDong Hyun Lee
dc.contributor.authorJun Su Park
dc.contributor.authorHyung Hee Cho
dc.date.accessioned2017-05-09T00:52:34Z
dc.date.available2017-05-09T00:52:34Z
dc.date.copyrightJanuary, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27930#011901_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149570
dc.description.abstractThe present investigation provides detailed local heat/mass transfer and pressure drop characteristics in a matrix cooling channel, under rotating conditions. The matrix channel had cooling subpassages with crossing angles of 45 deg. The detailed heat/mass transfer coefficients were measured via the naphthalene sublimation method, and pressure drops were also obtained. The experiments were conducted for various Reynolds numbers (10,500 to 44,000) and rotation numbers (0.0 to 0.8). In the stationary case, the heat transfer characteristics were dominated by turning, impinging, and swirling flow, induced by the matrix channel geometry. Average heat/mass transfer coefficients on the leading and trailing surfaces in the stationary channel were approximately 2.1 times greater than those in a smooth channel. In the rotating cases, the effect of rotation on heat/mass transfer characteristics differed from that of typical rotating channels with radially outward flow. As the rotation number increased, the Sherwood number ratios increased on the leading surfaces but changed only slightly on the trailing surfaces. The thermal performance factors increased with rotation number due to the increased Sherwood number ratios and decreased friction factor ratios.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLocal Heat/Mass Transfer and Friction Loss Measurement in a Rotating Matrix Cooling Channel
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004853
dc.journal.fristpage11901
dc.identifier.eissn1528-8943
dc.keywordsRotation
dc.keywordsFriction
dc.keywordsHeat
dc.keywordsMass transfer
dc.keywordsCooling
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsHeat transfer AND Reynolds number
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record