Show simple item record

dc.contributor.authorJibing Lan
dc.contributor.authorYonghui Xie
dc.contributor.authorDi Zhang
dc.date.accessioned2017-05-09T00:52:31Z
dc.date.available2017-05-09T00:52:31Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27933#021901_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149552
dc.description.abstractFlow characteristics and heat transfer performances in a rectangular microchannel with dimples/protrusions are studied numerically in this research. The height and the width of the microchannel is 200 μm and 50 μm, respectively. The dimple/protrusion diameter is 100 μm, and the depth is 20 μm. The effects of Reynolds number, streamwise pitch, and arrangement pattern are examined. The numerical simulations are conducted using water as the coolant with the Reynolds number ranging from 100 to 900. The results show that dimple/protrusion technique in mcirochannel has the potential to provide heat transfer enhancement with low pressure penalty. The normalized Nusselt number is within the range from 1.12 to 4.77, and the corresponding normalized friction factor is within the range from 0.94 to 2.03. The thermal performance values show that the dimple + protrusion cases perform better than the dimple + smooth cases. The flow characteristics of the dimples/protrusions in microchannel are similar to those in conventional channel. Furthermore, from the viewpoint of energy saving, dimples/protrusions in microchannel behave better than those in conventional channel. Also from the viewpoint of field synergy principle, the synergy of the dimple + protrusion cases are much better than the dimple + smooth cases. Moreover, the synergy becomes worse with the increase in the Reynolds number and decrease in the streamwise pitch.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow and Heat Transfer in Microchannels With Dimples and Protrusions
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4005096
dc.journal.fristpage21901
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsFriction
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsMicrochannels
dc.keywordsReynolds number AND Performance evaluation
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record