Show simple item record

dc.contributor.authorHai Trieu Phan
dc.contributor.authorNadia Caney
dc.contributor.authorPhilippe Marty
dc.contributor.authorStéphane Colasson
dc.contributor.authorJérôme Gavillet
dc.date.accessioned2017-05-09T00:52:28Z
dc.date.available2017-05-09T00:52:28Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27933#020901_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149536
dc.description.abstractThe experiments were performed to study the effects of surface wettability on flow boiling of water at atmospheric pressure. The test channel is a single rectangular channel 0.5 mm high, 5 mm wide and 180 mm long. The mass flux was set at 100 kg/m2 s and the base heat flux varied from 30 to 80 kW/m2 . Water enters the test channel under subcooled conditions. The samples are silicon oxide (SiOx), titanium (Ti), diamond-like carbon (DLC), and carbon-doped silicon oxide (SiOC) surfaces with static contact angles of 26 deg, 49 deg, 63 deg, and 104 deg, respectively. The results show significant impacts of surface wettability on heat transfer coefficient.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Boiling of Water on Nanocoated Surfaces in a Microchannel
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004935
dc.journal.fristpage20901
dc.identifier.eissn1528-8943
dc.keywordsBoiling
dc.keywordsWater
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer coefficients
dc.keywordsMicrochannels
dc.keywordsTemperature AND Heat flux
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record