Show simple item record

dc.contributor.authorDavid Geb
dc.contributor.authorFeng Zhou
dc.contributor.authorIvan Catton
dc.date.accessioned2017-05-09T00:52:23Z
dc.date.available2017-05-09T00:52:23Z
dc.date.copyrightApril, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27938#042604_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149502
dc.description.abstractNonintrusive measurements of the internal heat transfer coefficient in the core of a randomly packed bed of uniform spherical particles are made. Under steady, fully-developed flow the spherical particles are subjected to a step-change in volumetric heat generation rate via induction heating. The fluid temperature response is measured. The internal heat transfer coefficient is determined by comparing the results of a numerical simulation based on volume averaging theory (VAT) with the experimental results. The only information needed is the basic material and geometric properties, the flow rate, and the fluid temperature response data. The computational procedure alleviates the need for solid and fluid phase temperature measurements within the porous medium. The internal heat transfer coefficient is determined in the core of a packed bed, and expressed in terms of the Nusselt number, over a Reynolds number range of 20 to 500. The Nusselt number and Reynolds number are based on the VAT scale hydraulic diameter, dh=4ɛ/S. The results compare favorably to those of other researchers and are seen to be independent of particle diameter. The success of this method, in determining the internal heat transfer coefficient in the core of a randomly packed bed of uniform spheres, suggests that it can be used to determine the internal heat transfer coefficient in other porous media.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInternal Heat Transfer Coefficient Determination in a Packed Bed From the Transient Response Due to Solid Phase Induction Heating
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4005098
dc.journal.fristpage42604
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsHeat transfer coefficients
dc.keywordsElectromagnetic induction
dc.keywordsHeating AND Heat
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record