Show simple item record

dc.contributor.authorYiding Cao
dc.contributor.authorJian Ling
dc.date.accessioned2017-05-09T00:52:19Z
dc.date.available2017-05-09T00:52:19Z
dc.date.copyrightMay, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27940#051016_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149471
dc.description.abstractWith a substantially increased gas inlet temperature in modern gas turbines, the cooling of turbine disks is becoming a challenging task. In order to reduce the temperature at the disk rim, a new turbine disk incorporating radially rotating heat pipes has been proposed. The objective of this paper is to conduct a numerical investigation for the cooling effectiveness of the rotating heat pipe. One of the major tasks of this paper is to compare the performance between a proposed disk-blade assembly incorporating radially rotating heat pipes and a conventional disk-blade assembly without the heat pipes under the same heating and cooling conditions. The numerical investigation illustrates that the turbine disk cooling technique incorporating radially rotating heat pipes is feasible. The maximum temperature at the rim of the proposed disk can be reduced by more than 100 °C in comparison with that of a conventional disk without heat pipes. However, the average temperature at the blade airfoil surface can be reduced by only about 10 °C. In addition, both the heat pipe length and diameter have an important effect on the turbine disk cooling. Under the permission of material strength, a longer heat pipe or a larger heat pipe diameter will produce a lower temperature at the disk rim.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePerformance Simulations of a Gas Turbine Disk-Blade Assembly Employing Miniature Radially Rotating Heat Pipes
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4005707
dc.journal.fristpage51016
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsCooling
dc.keywordsManufacturing
dc.keywordsHeat pipes
dc.keywordsDisks
dc.keywordsBlades
dc.keywordsGas turbines AND Airfoils
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record