Show simple item record

dc.contributor.authorVinh-Nguyen Phan
dc.contributor.authorChun Yang
dc.contributor.authorPierre Joseph
dc.contributor.authorAnne-Marie Gué
dc.contributor.authorNam-Trung Nguyen
dc.date.accessioned2017-05-09T00:52:16Z
dc.date.available2017-05-09T00:52:16Z
dc.date.copyrightMay, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27940#051012_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149466
dc.description.abstractNanofluidics is the science and technology involving a fluid flowing in or around structures with a least one dimension in the nanoscale, which is defined as the range from 1 nm to 100 nm. In this paper, we present the fabrication and characterization of nanochannels in silicon and glass. Since the lateral dimension of the channels is limited by the wavelength of UV light used in photolithography, the channel width can only be fabricated in the micrometer scale. However, the depth of the channel can be controlled precisely by the etching rate of reactive ion etching (RIE). Microchannels and access holes were etched with deep reactive ion etching (DRIE). Both nanochannels and microchannels were sealed by a Pyrex glass wafer using anodic bonding. The fabricated nanochannels were characterized by capillary filling and evaporation experiments. Due to the small channel height and weak fluorescent signal, fluorescent techniques are not suitable for the characterization of the nanochannels. A long exposure time is needed because of the limited amount of fluorescent molecules inhibit the measurement of transient and dynamic processes. However, as the channel height is shorter than all visible wavelengths, the contrast in refractive indices of air and liquid allows clear visualization of nanochannels filled with liquids. Automatic image processing with matlab allows the evaluation of capillary filling in nanochannels. Interesting phenomena and discrepancies with conventional theories were observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFabrication and Experimental Characterization of Nanochannels
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4005702
dc.journal.fristpage51012
dc.identifier.eissn1528-8943
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsDrying
dc.keywordsManufacturing
dc.keywordsSilicon
dc.keywordsMicrochannels
dc.keywordsGlass
dc.keywordsSemiconductor wafers
dc.keywordsEtching
dc.keywordsExperimental characterization
dc.keywordsNanoscale phenomena
dc.keywordsFluids AND Photolithography
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record