Show simple item record

dc.contributor.authorSaeid Jani
dc.contributor.authorMeysam Amini
dc.date.accessioned2017-05-09T00:52:13Z
dc.date.available2017-05-09T00:52:13Z
dc.date.copyrightJune, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27943#064505_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149452
dc.description.abstractHeat and mass transfer analysis of falling liquid film over a heated horizontal elliptical tube used in desalination systems are investigated. The heat transfer analysis is based on the energy integral formulation with constant wall temperature. Thermal conditions at free surface of the liquid falling film are assumed to be subcooled and saturated, and the effects of surface tension have been considered. The effects of boiling and ripple at the film free surface have been ignored. Heat transfer zoning is considered as the three distinct regions, namely, the jet impingement region, the thermal developing region, and the fully developed region. Extensive analytical study is performed on the thermal hydraulic behavior of the three above mentioned regions, and correlations for both of the film and thermal boundary layer thicknesses, as well as the local and average heat transfer coefficients, have been derived. The results show that the effects of surface tension on heat transfer coefficient is nearly negligible. Based on the presented results, it can be emphasized that the overall heat transfer coefficient increases by increasing the ellipticity of the tube, implying that the elliptical tubes possess more advantages over circular tubes in desalination systems. Comparisons of the analytical results with the existing experimental data verify the validation of the present study.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer Analysis of Falling Film Evaporation on a Horizontal Elliptical Tube
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4005745
dc.journal.fristpage64505
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsEvaporation
dc.keywordsSubcooling
dc.keywordsHeat transfer coefficients
dc.keywordsHeat AND Mass transfer
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record